Don't get too comfortable with DB outlets
 2020-5-9 15:03:51       Yueqing Jiaxin Technology Co. , Ltd.

When the appliance is not in use, only turn off the appliance switch and do not pull the DB socket plug, this is very likely in the event of electrical failure, resulting in a short circuit. To develop the habit of first off the electrical switch and then pull the plug and plug the switch after the first switch. , use the process found when the plug plug plug loose, should immediately check whether the DB socket is bad, or replace the new plug DB socket, to ensure good contact. When the DB plug is loose, it will cause an accident. Weigh the weight of a single DB socket. Because the weight of a single DB socket will only be heavy if the copper strip inside the DB socket is thick, and the copper strip inside the DB socket is the most critical part of the socket. If it is alloy or thin, the copper strip will not have the same weight and quality. High-quality products because of the use of a large number of copper, there will not be a sense of lightness. DB socket and general household appliances, the computer on the stability of the power demand is higher, once the power supply system problems, will lead to poor power supply settings.